Precision Horizontal Glass Seaming Machine for Efficient Production

• Customization: Available
• Certification: CE, ISO
• Processing Speed: 1~40m/Min
• Model NO.: SXL1225DL
• Processing Thickness: 3-12mm
• Voltage: 380V
• Warranty: 1 Year
• Working Air Pressure: ≥0.6MPa
• Water Tank Volume: 530L
• Power: 22kw
• Grinding Head Numbers: 12
• Chamfer Width: 0.5~2mm
• Transport Package: Plastic Film + Pearl Cotton
• Specification: 7800*4500*2100mm
• Trademark: Singip
• Origin: China

Product Description

Horizontal Glass Seaming Machine
The seaming machine processing insulating glass(IGU) in architecture, doors and windows area as well as those square glass with different specifications on thickness as it can automatically recognizes the glass width and thickness. It is an economic and efficient device.
Using industrial computer control system, our machine has features of automatic identification of glass parameters and flexible processing of multiple specifications. Adopting 3 beams and 4 heads pass-through structure, it can be connected into an automated production line. Mass production and high-efficient production.
Main Technical Parameters

Model	SXL1225DL/SXL1220DL/SXL1216DL	SXL0825/SXL0820/SXL0816
Glass Thickness	3~12 mm	3~12 mm
Min. Glass Size	320*650 mm	320*650 mm
Max. Glass Size	2500*3600mm / 2000*3000mm / 1600*2500mm	2500*3600mm / 2000*3000mm / 1600*2500mm
Chamfer Width	0.5~2mm	0.5~2mm
Grinding Speed	1~40m/min	1~40m/min
Efficiency per Minute	1000*1000mm/6pcs/min	1000*1000mm/6pcs/min
Theoretical Output 8 hours/day	6pcs*60min*8h=2880	6pcs*60min*8h=2880
Estimated Output 8 hours/day	2880*0.7= 2000~2880	2880*0.7= 2000~2880
Grinding Head Numbers	12	8
Overall Size	7800*4500*2100mm / 7800*4000*2100mm / 6000*3600*2100mm	7800*4500*2100mm / 7800*4000*2100mm / 6000*3600*2100mm
Voltage/Frequency	380V/50HZ or others	380V/50HZ or others
Working Air pressure	≥0.6Mpa	≥0.6Mpa
Water Tank Volume	530L	530L
Power	22Kw	18Kw

1.  Unique design

SXL series seaming machine adopts cutting edge design- Three beams structure and four grinding heads. Different with the traditional PLC control, our machine adopts the motion controller and Famous brand servo motor that can offer a high transmission speed and capable of network support. It can be a production line for large-scale production.
Features

1. The glass transmission adopts servo driver and rubber roller for synchronous transmission with the polyurethane wheel in press and side guide that can offer a stable transmission and this is benefit for the glass positioning and can improve the grinding performance.
2. The opening and closing device on grinding head is driven by name-band servo driver and gear reducer. Adopt linear guide and helical gear rack on transmission because they have good wear resistance and provide minimum gap on mesh, which is benefit on glass position.
3. The probe will not contact glass in positioning. This method makes it not easy to wear and has a longer service life;
4. Easy to process 3-12mm thickness glass without any concern; 
5. Adopts double-row roller chain on transmission, which is more stable and quieter;
6. The opening and closing structure adopt helical rack drive, the speed can up to 40 meters per minute, more accuracy and more durable;
7. The grinding wheels of the upper and lower arris adopt cross structure design that can guarantee glass can be grinded thoroughly;
8.  Without rotation action design on grinding head, avoiding the position error and improve the production efficiency;
9. Cancel the cylinder design on grinding head movement. Save space for other machine(500-700mm width).

Main configuration

Name	Description
Beam frame	Welded steel with annealing treatment
Rubber roll	Solid bar has been covered with superior material rubber and the surface pass smooth treatment
Linear guide	Taiwan HIWIN / Ender
Grinding motor	KENT from UK
Servo driver	MOTONG (High-end 8-in-1 drive) Patented product
Control system	German Famous brand Bus communication (Industrial Ethernet technology can be networked remote debugging system upgrade free of charge for life)
Transmission speed	100Mbps / Full Duplex
Communication Cycle	250us
Precise synchronization	1us
Ultrasound	Bonner (USA)
Immediately relay	Famous brand
Contactor, terminal relay	Famous brand
Power Switch	Famous brand
Photoelectric Switch	Micro Detectors (Italy)
HIM	Industrial Computer
Width detect sensor	Banner from USA
Magnetic valve	Airtac
Air cylinder	Airtac
Bearing	NSK

Details
1.Patented waterproof design
Original structure on external installation of rubber roller bearing seat with rubber inside, avoided the water sinking in the bearing seat. This design can solve the problem of bearing damage and cut your maintenance work. 
Daily use only needs regular lubrication
2.Patented design
Special design on grinding wheel feeding structure. Adopt the pallet type structure on feeding position that is convenient for the operator to set the wheel while he needs to adjusting wheels.
3.The side-guiding structure
The side wheels are made of polyurethane material and stainless-steel shaft. 100% rust proof design. Compared with the regular timing belt structure, this structure is simple and reduce the risk on parts replacement, such as the belt, pulley, bearing.
Low maintenance cost and longevity using.
4.An upgrade position detection structure:
The mechanical structure adopts the principle of leverage, easy to install and adjust.
This new design can eliminate the defect caused by traditional structure with limited switch and spring structure: inaccurate position due to its' large gaps and short service life characteristic.
5.The pressing roller device using an independent cylinder that make it has a strong pressure sensitivity and it is also made of polyurethane material with stainless steel shaft. Without any concern on bearing replacement
6.The grinding motors comes from UK.  Environmentally friendly and energy-saving.
7.A full set of British brand gear reducers with inserts ensure the parallelism of drive shaft, greatly extending its life and making the chain adjustment be simple and convenient.
8.A couple of grinding head is supported by 4 pcs of bearing to reduce the vibration.
Offering enough space to adjust the wheels after replacement, convenient to do the maintenance work.
9.Patented technology:
The upper and lower chamfering cross-wheel edging adopts the principle of static feeding-Arris grinding wheels prepare feeding well first. It won't move to grind the edge until it touches glass
Advantages:
1. Compared with the movement feeding, this method accuracy can be ensured that the glass is ground from beginning to the end.
2.The upper and lower grinding wheels will touch the glass at the same time. It will not bend the glass and damage the glass.
10.Patented technology:
The fourth side can start grinding from left side or right side that reduce the mechanical loss of empty running, makes the service life longer and double the efficiency of edging.
The width of the double row of pressing wheels to press the glass edge is only 12-15mm ensuring zero scratches on the glass surface.
11.Standardized manufacturing process:
The movement of the beam is driven by helical gear and gear reducer, the transmission is noiseless, and the repeated positioning is accurate, which solves the problem of inaccurate positioning of the timing belt structure which is easily damage to the components.
12.Standardized manufacturing process:
Each part of each device is coded and entered into company files, so that after-sales conditions can be tracked at any time.