High Speed Glass Straight-Line Double Edging Processing Machine on Promotion

• Customization: Available
• Certification: CE, ISO
• Warranty: 1 Year
• Model NO.: SSZM4225GS
• Certificate: CE
• Min. Process Size: 600X400mm
• Max. Process Size: 4200×2500mm
• Glass Thickness: 3~25mm
• ∠45° Chamfer Max Width: 1~3mm
• Working Table Height: 900mm±30mm
• Type: Glass Edging Machine
• Structure: Vertical
• Control System: PLC
• Glass Edging Machine Type: Glass Straight Edging Machine
• Grinding Head Number: 20
• Condition: New
• Transport Package: Wooden Pallet+Film
• Specification: 4930x5600x2300mm
• Trademark: Singip
• Origin: China
• HS Code: 846420
• Production Capacity: 20 Sets/Month

Product Description

GLASS STRAIGHT LINE DOUBLE EDGING MACHINE 
L SHAPE PRODUCTION LINE

Machine Characters

1.Standard function

Connecting control function
The touch screen of No.1 double edger is the main controller, which can control the whole line start and stop, No.2 double edger's basic control, transfer table and detecting table.
No.2 double edger's touch screen can only control itself.
Admin-System provides 3 user levels for password changing, user adding, user deleting.
2. Alarm
If there are problems while machine running, the alarm light will be on at the bottom of operation page, user can check the alarm information pages for details with real time status of PLC input and output, yield, etc.  

3.Processing margin detecting

Standard processing margin range is 2mm, if the processing margin of current glass exceeds 2mm, the edger will automatically slow down the grinding speed to avoid chipping. The total processing margin range shall be 1~6mm. if glass exceed this range, the edger will more and more slowly even stop running.

4.Energy saving

Machine has sleeping function (Original setting is 1 minute). If our machine detects no glass feeding for processing over 1 minute, the system will turn off grinding motor, pump, blower, etc. When there is glass feeding in again, machine will start running automatically.
Besides, the system has a detection function of glass position, if the glass doesn't locate in the available grinding area (the area for glass and wheel touch each other), the system will lower the speed of grinding wheel motor to save power.

Machine Introduction

Intelligent High Speed Double Edging Machine

 

1. The new design features a layered layout. Electrical part is on top, the water pipe and the water tank of grinding head on middle and the pneumatic control part on bottom. Humanized design to reach safety usage standards and simple maintain.
2. Control system has capacity to set one time finish processing through HMI operation by PLC which is suitable for process building glass, shower room, furniture glass, laminating glass, wall glass, Low-e glass, appliance glass, etc.
3. Machine's bed is undergone special treatment. We adopt high efficiency double linear rail and ball screw transmission, servo motor/frequency converter device.
4. Polishing system: Pneumatic polishing
Rough grinding (Diamond wheel/Resin wheel): Manual

Details

•The base bed


The base bed use square tube with a thickness of 10 mm and a size of 200X300, which guarantees stability and durability.

•Margin Detection Device

•V - shaped needle roller guide ( Used in Carriage for Polishing wheel)

•Polish wheel pneumatic recovery wear

 

•Lower chamfering grinding head motor unit

Avoiding the problem of motor damage caused by water ingress. Easy to maintain.
•No-Main shaft system

•Main drive mechanism and width adjustment mechanism

•ABB Motors (#6-#10) & Motor carriage (Polish Area)

Adopt high accuracy needle roll carriage structure on polish parts

 

Grinding wheel configuration (20 Spindles)

Wheel pair Item  spec		L1 Bottom edge	L2 Bottom edge	L3 Bottom edge	L4 chamfer	L5 chamfer	L6 chamfer	L7 chamfer	L8 Bottom edge	L9 Bottom edge	L10 Bottom edge
Motor	power(KW)	3	3	2.2	2.2	2.2	2.2	2.2	2.2	2.2	1.5
	rounds/min	4600	4600	2800	2800	2800	2800	2800	2800	2800	1400
Wheel	material	Diamond Ф175 #100	Diamond Ф175 #140	Resin Ф170 #240	Resin Ф150 #240	Polish Ф150	Resin Ф150 #240	Polish Ф150	Polish Ф150	Polish Ф150	Shine polish

 

Main Parameter -DOUBLE EDGING MACHINE
Max. process size	4200×2500mm
Min. process size	600x400mm
Glass thickness	3~25mm
∠45° chamfer max width	1~3mm
Bottom edge max grinding qty	3mm
Working table height	900mm±30mm
Grinding wheels	4200 edger:20pcs  2500 edger:20pcs
Width adjustment speed (m/min)	15m/min (servo control)
Pneumatic pressure	0.7Mpa
Air volume	About 1069m³/h
Pump output	About 10m³/h
Total power	About 110kw
Dimension	4930x5600x2300mm
Weight	About 8000kg
Processing Speed	1~8 m/min

-L-TYPE TRANSFERRING TABLE    

L-type transferring table	Machine model
	SST4225L
Transmission speed(m/min)	1-28m/min
Thickness(mm)	3-25mm
Min. Size of glass (mm)	350x350mm
Max. Size of glass (mm)	4200x2500mm
Transmission method	Inverter motor
Control method	PLC
Transmission structure	V-type belt
Lifting structure	Pneumatic lever lift
Total power (KW)	9 kW
Voltage(V)	380V / 50Hz (or customize)
Air pressure(Mpa)	0.4--0.8
Air pressure(Mpa)	70dB (Environmental noise below 50 db condition)
Equipment noise (measured at a distance of 1m from the machine body)	-10-50ºC
Temperature range(ºC)	20-95%RH